Перевод и анализ слов искусственным интеллектом ChatGPT
На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:
- как употребляется слово
- частота употребления
- используется оно чаще в устной или письменной речи
- варианты перевода слова
- примеры употребления (несколько фраз с переводом)
- этимология
advantages$549827$ - перевод на греческий
![A pile of pressure capsules with corrugated diaphragms in an aneroid [[barograph]]](https://commons.wikimedia.org/wiki/Special:FilePath/Barograph 03.jpg?width=200 "A pile of pressure capsules with corrugated diaphragms in an aneroid [[barograph]]")
![A [[pressure gauge]] in action](https://commons.wikimedia.org/wiki/Special:FilePath/Manometer anim 01.gif?width=200 "A [[pressure gauge]] in action")
![psi]] (red scale) and [[kPa]] (black scale)](https://commons.wikimedia.org/wiki/Special:FilePath/Psidial.jpg?width=200 "psi]] (red scale) and [[kPa]] (black scale)")
![[[Ring balance manometer]]](https://commons.wikimedia.org/wiki/Special:FilePath/Ring balance manometer VEB Junkalor Dessau.jpg?width=200 "[[Ring balance manometer]]")
![Checking [[tire pressure]] with a spring and piston tire-pressure gauge](https://commons.wikimedia.org/wiki/Special:FilePath/U.S. Air Force Staff Sgt. Dustin Roberts, a 379th Air Expeditionary Wing Public Affairs broadcaster, checks his tires at Al Udeid Air Base, Qatar, Jan. 10, 2014 140110-Z-QD538-010.jpg?width=200 "Checking [[tire pressure]] with a spring and piston tire-pressure gauge")
Определение
Википедия
A bridge circuit is a topology of electrical circuitry in which two circuit branches (usually in parallel with each other) are "bridged" by a third branch connected between the first two branches at some intermediate point along them. The bridge was originally developed for laboratory measurement purposes and one of the intermediate bridging points is often adjustable when so used. Bridge circuits now find many applications, both linear and non-linear, including in instrumentation, filtering and power conversion.
The best-known bridge circuit, the Wheatstone bridge, was invented by Samuel Hunter Christie and popularized by Charles Wheatstone, and is used for measuring resistance. It is constructed from four resistors, two of known values R1 and R3 (see diagram), one whose resistance is to be determined Rx, and one which is variable and calibrated R2. Two opposite vertices are connected to a source of electric current, such as a battery, and a galvanometer is connected across the other two vertices. The variable resistor is adjusted until the galvanometer reads zero. It is then known that the ratio between the variable resistor and its neighbour R1 is equal to the ratio between the unknown resistor and its neighbour R3, which enables the value of the unknown resistor to be calculated.
The Wheatstone bridge has also been generalised to measure impedance in AC circuits, and to measure resistance, inductance, capacitance, and dissipation factor separately. Variants are known as the Wien bridge, Maxwell bridge, and Heaviside bridge (used to measure the effect of mutual inductance). All are based on the same principle, which is to compare the output of two potential dividers sharing a common source.
In power supply design, a bridge circuit or bridge rectifier is an arrangement of diodes or similar devices used to rectify an electric current, i.e. to convert it from an unknown or alternating polarity to a direct current of known polarity.
In some motor controllers, an H-bridge is used to control the direction the motor turns.
